.452 diameter, 240 grain Controlled Fracturing Bullets (50 count)

Item Number
02452240SPM

Controlled Fracturing bullets are pre-stressed at specific points so that after a predetermined penetration depth, the razor-edge petals deploy, releasing an energy spike. These bullets are designed to deliver maximum terminal performance and are optimal for use in .452 muzzleloader loads. 

In stock
$76.00
Rating:
100 % of 100

Please note that these are bullets (projectiles) only for reloading. This product is not loaded ammunition that is ready to use in a firearm.

Lehigh Defense originated Controlled Fracturing Technology.  These bullets are designed to deliver maximum terminal performance.  Controlled Fracturing bullets are produced from solid copper and are pre-stressed at specific points so that after a predetermined penetration depth, the razor-edge petals deploy, releasing an energy spike and then separate and radiate outward from the primary path of the bullet.  The bullet shank, now back to bore diameter, continues penetrating straight and deep along the initial impact path.

Unlike traditional expanding bullets which mushroom and dramatically limit the bullet's penetration and provide only one wound path, Lehigh Defense's Controlled Fracturing ammunition creates an initial energy transfer, multiple wound paths, and a deep penetrating base with a sharp front cutting edge for extreme terminal performance.

I consider the Controlled Fracturing to be the ULTIMATE self-defense bullet and the 9mm 115 grain Controlled Fracturing is what I carry daily.

- Bill Wilson

Controlled Fracturing bullets are currently available in the following caliber diameters: .308, .355, .357, .375, .400, .451, .452, .458 and .500.

Solid copper Controlled Fracturing bullets meet the criteria of states and jurisdictions calling for lead free projectiles.

More Information
Typical Usage Hunting
Firearm Type Muzzleloader
Box Quantity 50
Velocity Range Supersonic
Caliber Muzzleloader .452
Manufacturer Lehigh Defense
Reloading Item Type Bullets
Bullet Technology Controlled Fracturing
Bullet Diameter .452
Bullet Weight (grains) 240
Ballistic Coefficient (G1) 0.18
Ballistic Coefficient (G7) N/A
Bullet Length .900
Lead Free Bullet Is lead free
Maximum Muzzle Velocity (fps) 5000
Minimum Impact Velocity (fps) 1200
Minimum Twist Rate 1:28
Ogive Length (inches) 0.452
Sectional Density .168
Velocity Sensitivity Is velocity sensitive
Notes MUZZLELOADER ONLY BULLET (SABOT REQUIRED).

Please visit the Lehigh Defense Load Data page linked here for load data.

Write Your Own Review
You're reviewing:.452 diameter, 240 grain Controlled Fracturing Bullets (50 count)
Your Rating
What's this? Check "Remember Me" to access your shopping cart on this computer even if you are not signed in.