OIL, ULTIMA-LUBE II, ACTION OIL, 4 OZ BOTTLE

Special additives have been added to produce a long-lasting lubricant that has superior resistance to heat and protects from rust and excess metal on metal wear. These same high-pressure additives give Ultima-Lube Action Oil special adhesive properties that ensure it adheres well to metal surfaces without adding excess drag like heavy greases.

Because of its high heat resistance, Ultima-Lube Action Oil can be used for high-volume applications like full-auto, suppressed or high round count competition firearms with little loss in performance at over 400 degrees.

• High heat resistance ideal for high friction, high round count firearms
• Special Additives protect from rust, wear and enhance adhesion to metal
• Ideal viscosity for all types of firearms
• Protects and lubricates from -40 degrees to 425 degrees

NOTE: Ultima-Lube Action Oil may be red or blue in color depending on when it was packaged.  The oil itself is the same, only the color is different.

WARNING: This product can expose you to chemicals including petroleum products, which are known to the State of California to cause cancer and reproductive harm. For more information go to p65warnings.ca.gov.

Ultima-Lube II is available in five formulations: 

• Ultima-Lube II Oil:  Thin viscosity penetrates hard-to-get-to areas. Ideal for cold weather use, 10° to 350° F temperature range. Recommended Uses: Tightly fitted handguns of all types.
  • Item number 577-2, 577-4
  • Material Safety Data Sheets (60% Lucas Gun Oil # 10560, 40% Lucas Assembly Lube # 10559)
• Ultima-Lube II Universal: All-purpose thin viscosity grease for all firearms, 30° to 200° F temperature range. It is recommended for service pistols/revolvers, broken-in custom handguns, long guns of all action types, and AR-style rifles.
  • Item number 1027-2, 1027-4
  • Material Safety Data Sheet (Chevron Multifak EP 00)
• Ultima-Lube II Grease: Ideal for heavy-wear areas, it stays in place under extreme conditions, in the 40° to 350° F temperature range. Recommended Uses: Full and semi-automatic rifles and carbines. It is Optimal in AR-style rifles at temperatures above 50° F.
  • Item number 579-2, 579-4
  • Material Safety Data Sheets (35% Lucas Gun Oil # 10560, 65% Lucas Assembly Lube # 10559)
• Ultima-Lube II Lite Oil:  A very low-viscosity lubricant, ideal for extreme cold weather use. Recommended Uses: Tightly fitted handguns of minor caliber.
  • Item number 621-2, 621-4
  • Material Safety Data Sheet (Lucas Gun Oil # 10560)
• Ultima-Lube II Action Oil: Features a special blend of additives that make this oil perfect for all types of high-friction firearms while also ensuring it adheres well to metal surfaces without adding heavy drag found in heavy greases.  Recommended for high-volume, high-heat producing firearms, with an operating range of -40° to 425° F.
  • Item number 968-2, 968-4
  • Material Safety Data Sheet (Lucas Extreme Duty Gun Oil # 10901)

General recommendations for lubricating firearms:

• ALWAYS wear safety glasses when disassembling or reassembling any firearm!
• Do not over lube!!!
• Once your firearm is broken in, lube only those areas where you see visible wear; lubricating areas that don't have contact will only attract debris and fouling.
• After lubrication and re-assembly, cycle the firearm several times and wipe off any excess lubricant that may seep out. If you have lubed properly, this should be minimal.
• For firearms that will be used at constant temperatures below 10° F, we recommend you use a very light coat of a very thin lubricant like Break Free CLP or FP-10.

WARNING: This product can expose you to chemicals, including lead, which are known to the State of California to cause cancer and reproductive harm. For more information, go to p65warnings.ca.gov.

Ultima-Lube II Universal: All-purpose lube for all types of firearms, and stays put under extreme conditions, 40° to 350° F. Recommended Uses: Service pistols/revolvers and broken-in custom handguns, Long guns of all action types, AR-style rifles in the 20° to 50° F temperature range.Item number 578-2, 578-4
Material Safety Data Sheets (55% Lucas Gun Oil # 10560, 45% Lucas Assembly Lube # 10559)