SPRING KIT, CUSTOM-TUNE, S&W K/L/N FRAME, REVOLVER

I had a fantastic experience. The spring kit fell right into place. The trigger is smooth and light. Shipping and ordering was a great experience.

Every S&W revolver I purchase new or used gets a Wilson combat spring kit before I even shoot it!! It's very reliable and easy to install. I'm not kidding when I say, if you want a SMOOOOOOTH RELIABLE action for your S&W wheel gun, get the Wilson combat spring kit!!!

Upgraded my new 29-10 revolver with this kit using the 14# return spring. Absolutely incredible upgrade! Pull weights went from 12/4.5 to 10/3 and feels incredibly smooth. DA pulls are controllable with one-hand now and the new mainspring doesn't have that 'snap' feel when the hammer drops. Upgrade installs in less than 30 minutes.

My Smith and Wesson 686 plus came stock with a smooth but heavy trigger. Swapping out the main spring and the trigger return spring took all of 15 minutes and 15 dollars. The trigger pull in DA is now 7 pounds and SA is at exactly 3 pounds. The difference is significant and makes what already was a fine firearm exponentially superior to anything straight off the factory line. Hammer still drops hard enough for 100% of factory ammunition primer ignition.

I was unhappy with the two rebound springs that came with the Evolution IV DAO hammer. I tried a variety of combinations of rebound springs (factory, Apex competition, Apex duty, Wilson 14#, 13#, 12#) and mainsprings (either factory or the Wilson reduced). I came to the conclusion after many assembly and disassemblies that the most reliable setup was with the 14# rebound spring Wilson and the Wilson reduced mainspring. No slop in the trigger return and consistent ignition without misfire - and of course - a very nice trigger pull. I have not made any other mods to this 686 (no polishing of rebound slide) and it fires beautifully. Shoots like the Sig P250 (one of the best DAO pistols out there, though not a wheelgun).

Had a great experience installing the Spring Kit in my Model 66-6. I had zero failure to fire even with the frame mounted firing pin. I bought 3 more to go on my Model 10-5, 29-3, and model 686 Plus. Only possible issues I am expecting is on the Model 29-3 perhaps. The grip frame is a tad longer than K and L frames, it might have less leverage if the Wilson is shorter than the factory mainspring . But so far what a great way to improve trigger without permanent alteration or damage to the clock work.

I had stayed away from newer Smith revolvers because of their horrendous trigger pull. When I came into possession of a model 64-8, I heard about these spring sets in a YouTube video by MrGunsAndGear. I put these in and went to the range today. Im blown away at how much lighter and smoother the double action trigger pull is! I cant recommend these highly enough!

Polished all internal surfaces first, several good YouTube videos for instruction. Went with the 13lb trigger return spring and the hammer spring. Fired 100 rounds at the range Federal Hydra-Shok 110gr. Low recoil, Perfecta 38sp. 158gr FMJ, HPR 38sp. 125gr TMJ, Hornady Critical Defense, Fiocchi 357 125gr SJSP with zero misfires. Trigger pull light and smooth with better groups using double action. This is a new gun so it wasnt smooth before polishing.

I initially had a problem with the hammer spring fitting/functioning in my very old 5-screw K-frame. Wilson Combat support quickly diagnosed my problem and shipped me a spring that they modified slightly to work in my revolver. The very slight straightening of the spring near the hook end resulted in a perfect fit in my old Victory model and gave me a lighter action. I combined it with the middle weight trigger return spring & couldnt be happier with the result. Great product and SUPERB customer support!!