Clearance
Upgrade your shooting with the Wilson Combat WCP320 full-size grip module for SIG-SAUER P320. Our molded polymer grips provide improved control and decreased recoil, taking your experience to a whole new level!
Wilson Combat SIG SAUER Grip Modules are not compatible with California versions of the SIG SAUER P320.
Revolutionize your shooting experience and upgrade the concealed carry potential of a SIG-SAUER P320 with Wilson Combat's reengineered grip frame. Our molded polymer grips will not only improve your grasp on the gun but also control recoil better than before. With its redesigned shape, texture, and ergonomics, these six new models are designed to give you that custom handcrafted feel in no time at all—available in both black or tan shades for standard-size frames as well as those equipped with manual safeties! Our fresh look at the P320 grip module incorporates the suggestions of tactical trainers, champion shooters, and firearms experts into the final product that has a look that is unmistakably "Wilson". We believe it is the most practical, comfortable, and stylish P320 grip available and the ideal choice for concealed carry and defensive handgun use.
- Safety (select): No Manual Safety
- Colors (select): Black, Gray, Green, Tan
- Weight: 3.2 oz.
- Length: 8 1/8"
- Height: 4 1/4"
- Width: 1 1/4"
- 2" grip (Front to Back)
- Caliber availability: 9mm, .40 S&W, .357 SIG
- Upgraded, high cut 1911 style beavertail grip tang for smooth draws
- Modified backstrap shape for more natural pointing and enhanced grip/recoil
- Undercut front-strap and reshaped, radiused trigger guard for the highest grip possible
- Improved grip traction and increased grip pattern coverage with Wilson Combat's exclusive Starburst grip pattern on the sides and aggressive texturing on the front and backstrap
- Internal slots for rod-style Tungsten weights (NW734)
- Not compatible with X-Five Tungsten weights
- Factory SIG-SAUER magazine release, spring, and lock included
- Module color recieved may vary slightly from the product photos shown due polymer batch blending differences
Important Note: Wilson Combat SIG SAUER Grip Modules are not compatible with California versions of the SIG SAUER P320.
Disclaimer: "SIG" is a federally registered trademark of SIG SAUER Inc. and is one of many trademarks owned by SIG SAUER Inc. Neither Wilson Combat nor this website is affiliated in any manner with or otherwise endorsed by SIG SAUER Inc. The use of "SIG" or "SIG SAUER'' on this page is merely to advertise the sale of SIG pistols, parts, or components. For genuine SIG SAUER Inc. products and parts, visit Sig Sauer.
Related Products
-
-
Clearance
-
Clearance
-
Clearance
Reviews
-
Outstanding Grip Module.
Got mine today installed within 30 minutes of receiving it and it feels great. Like all Wilson products outstanding.
-
Upgrade Your P320/ M17
I love my M17 with a no safety version. But the grip just seemed a bit too big for me. I bought the Wilson Combat grip frame and oh what a difference. I shot OK with the original grip frame. However I probably increased my accuracy considerably with his grip frame. I absolutely love it. Very easy to switch out as well. Just be aware it is a slightly different FDE color than the original P320 or M17. Not a knock on it just something to be aware of. Also, most pistols I use end up getting a Talon type grip, but not with this one. And I'm glad so I don't have to cover up the beauty of the grip as it is. To me that doesn't matter much with the black guns, but once you get different colored grips it does make a difference aesthetically. I am very happy with this purchase.
-
Feels Great, Poor Fit
The feel of this grip module is outstanding. Unfortunately it's either a bad casting or bad design. The area that houses the recoil assembly is too narrow so the slide is pushing that part of the grip module down creating a huge gap. It's a very bad fit.
-
Doesn'T Fit 4.7" Slide
This grip module feels really nice, but it doesn't fit the 4.7" slide so well. I am getting an increasingly wide gap between the slide and the grip module moving towards the muzzle. The grip module is narrower than the Sig grip module in the recoil assembly channel so it is being pushed down. I've tried sanding but no luck yet. I think this is just a bad casting.
-
Great Replacement If You Don;T Like The X-Five Grip
Had no issues replacing the grip frames with my X-Five. For me Wilson got it right. With the new IDPA Rule Book is this module IDPA Compliant for SSP Division? Thanks Bill...great design.
-
Improvement Over Original Sig Grip
This grip will take all of my mags. I have a P320 Full size and a Legend X Five as well as 21 +1 mags. They all work with this grip. My only complaint and thus the 4 rather than 5 star is that the weight bars really need to be part of the deal. I mean real, how expensive could they be and with out them (when the gun is not loaded) the grip feels chintzy and cheap. Also, I do not have gorilla hands but even so, it is a tight fit. Would love it if this came in a larger size.
-
Sig M17, It Works!
Bought the full size rail grip module (no manual safety), says it wasn’t compatible, was disappointed at first as I had already ordered it, but figured I’d see if it fit, I ran several magazines through it with zero malfunctions. Way better than the stock module, gets rid of that weird palm swell on the stock mod, texture, fit, and feel are great, going to get the weight kit next and see how that goes.
-
Better Than Stock Sig Frame
Nice texture on front and rear, wish it went up higher. FCU was snug upon installation. Has run perfectly with a Sig pro-cut slide and Zev barrel. Will be purchasing a Carry II in the future.
-
Great Product But Sent Me A Defective One
I was sent this grip module to replace a very "blocky feeling X5 grip, that was too big for my hand. This one fits my hand much better and is easier to reach the magazine release button. Unfortunately, the front dust cover is slightly crooked downward in the front and looks bad. They are out of stock, so I have to use it as is, until they will hopefully replace it. If you get one, before glueing the weights into it, take a straight edge and check the dust cover, as this could be a repeatable mistake.