Clearance
The RCBS 300 HAM'R 2-die set is the ultimate reloading tool. It provides everything you need to turn your 300 HAM'R cases into precision rounds quickly and efficiently.
If you're looking for a reliable reloading tool, look no further than the RCBS 300 HAM'R 2-die set. It's your one-stop shop to quickly and accurately turn your 300 HAM'R cases into perfectly crafted rounds. This set includes a sizing and seating die. With this die set, you can easily and quickly load your 300 HAM'R rounds to ensure maximum performance. Get quality results every time with the RCBS 300 HAM'R 2-die set.
300 HAM'R
Taper crimp seating die
Small based sizing die
Related Products
-
-
Clearance
-
Clearance
-
Clearance
Reviews
-
Correcting user comment about crimping.
The seating die does crimp like all RCBS small base 2 die sets with a seating/crmip die. The method to crimp is documented in the instructions. For your first use you seat the die high and lower the bullet seating stem until you reach the desired O.A.L. on your first case bullet seating. Then you raise the seating stem as high as you can. Take the same cartidge you just seating and run it up into the die. Then lower the die until you feel it touch the case. Lower the ram, then low the die in 1/4 turn increment and run the cartirdge back into th3 die until you get the desired crimp. Once the crimp looks good run case back into the die until the ram bottoms out and then lower the seating stem until it touches the bullet. Your die is now ready to seat and crimp at the same time.
-
Quality product and rapid response
I ordered these dies from Wilson Combat and as expected Wilson had it here in just a few days. Love Wilson for quality and promptness! Oh, and the dies are great too, but they always have been.
-
Great Dies For Converting 5.56 Cases
I own and use RCBS, Hornady and lee reloading dies all are serviceable but some are better than others. I must say that I cannot find anything wrong with these dies, the quality is outstanding especially compared to lee dies, the engineering that went into the expander makes these dies noticeably better for converting 5.56 to 300 ham’r. I don’t run these cases through an intermediate expander ( I did at first) I have found that if I trim my cases with the saw 1st debur them then size them in the rcbs sizer die I get almost zero neck casualties. Anyways these are great dies.
-
Not As Stated
The sizing die is fine A+, the seating/crimp die will seat but it does not crimp. There is no crimping function at all only seating. If you want to crimp your cases you will need to order another die from another source.
-
Worth The Money Over The Lee Dies
I own 5 sets of dies from Lee, 2 from RCBS (now), several others from Hornady, Lyman and Dillion. The seating die on these dies is far more consistent, by design, than that of the Lee. The materials are nicer. I'm loading extremely accurate ammo with these dies; if you are going to be loading this cartridge you're in for a treat for the accuracy. It would be penny-wise and pound foolish to save $25 on the Lee dies.