Clearance
SPRING, HAMMER, BERETTA, 90 SERIES, CHROME SILICON, 12LB
$6.95
Introducing Wilson Combat's Hammer Spring for 90 Series Beretta handguns. This 12-pound spring has been engineered to provide peak performance in competition use, with reduced power suitable for 9mm and .40 caliber handguns.
Introducing the Wilson Combat Hammer Spring for 90 Series Beretta handguns! This spring will revolutionize your shooting experience with its 12-pound weight and chrome silicone coating that ensures durability and rust resistance. It's perfect for competition use, as it has been reduced in power yet still retains effectiveness. Plus, this hammer spring is compatible with all full-size and compact 92 models. Get the Wilson Combat Hammer Spring for that edge in accuracy and performance. Make sure you have it on your side in the heat of competition!
- 12-pound spring rated for 9mm and .40 caliber handguns
- Chrome silicone coated for durability and rust resistance
- Reduced power suitable for competition use
- Compatible with all Full size and compact 92 models
Related Products
-
-
Clearance
-
Clearance
-
Clearance
Reviews
-
Light primer strikes in DA with skeletonized hammer
I used the 12# hammer spring and light firing pin from WC on my 92A1 with a skeletonized hammer. The DA pull averages 6.5lbs and just under 3lbs in SA. I get light primer strikes using factory loads about 50% of the time. I’ll order the 13# and 14# pound spring to rectify the issues with my specific pistol.
-
Very Noticeable Improvement
The Beretta M9 comes with a very strong hammer spring, that was the first thing to swap out using the 12# spring. Reduced the trigger pull by I would estimate 3 pounds at the trigger. Makes the double action pull much more manageable. Easy to install, remove the grips, press the lanyard rod against the table, push the pin out, slowly lift the gun up and the spring and lanyard pin come out. (See instructional vids on youtube.) Install the spring, insert the lanyard rod, press on a table, line up the hole and insert the pin. Install the grips. Done!
-
Wonderful Easy Upgrade
I put this 12# spring in with the wilson combat hammer and kept the original firing pin spring from the factory and have fired many different brands and works like a charm!...Highly recommend this upgrade for a totally different trigger
-
Reduced My Da Trigger Pull To 8#
Reduced my DA trigger pull from about 12# to 8#. never a misfire. Wonderful. I left the stock hammer in and it worked fine with this spring. Later I also upgraded the hammer as well. I stepped thought this using the 16#, then the 14# and finally the 12# all worked fine but the 12# yielded the 8# DA pull.
-
Amazing Upgrade!
Totally transformed the gun. Trigger is so light and crisp now. Been 100% reliable for me. Tested several types of ammo with zero light primer strikes.