Clearance
Release the full capability of your Beretta handgun by upgrading to Wilson Combat's Trigger Conversion Unit. This revolutionary trigger unit not only reduces power and eliminates spring breakage, but it also dramatically enhances the overall user experience through an improved trigger feel.
Unleash the true potential of your Beretta handgun by replacing it with Wilson Combat's Trigger Conversion Unit. This revolutionary trigger unit not only reduces power and prevents spring breakage, but also boosts user experience with a significantly improved trigger feel. It's coated with Robar NP3 coating for maximum lubricity — providing you with an ultra-smooth operation every time. With this trigger unit, you can finally get the performance boost you need to stay ahead of the competition. Upgrade your handgun today with Wilson Combat's Trigger Conversion Unit and experience a new level of accuracy and precision!
- Reduces power and prevents spring breakage for improved performance
- Enhances trigger feel with reduced spring stacking
- Coated with Robar NP3 coating
- Delivers a performance boost to stay ahead of the competition
- Compatible with 92 series metal triggers only
- Not compatible with the 92A1 or any model with polymer trigger
For complete installation instructions, click here.
Related Products
-
-
Clearance
-
Clearance
-
Clearance
Reviews
-
This Is The Trigger Spring Beretta Should Be Using From The Factory
Impressive upgrade, but I did have to use files to hand fit the piece. Well worth the effort through, this part, combined with the reduced reach trigger, and a #16 hammer spring, work to make this action much easier and smoother. Well done Wilson Combat, Im impressed!
-
Not Exactly Plug And Play But...
As some others have said I did need to do some filing to get the piece to fit without sticking/grabbing the trigger after each trigger pull. Have yet to get to the range as I just installed the parts this weekend, but based on feel alone I am happy with the results installed with short reach steel trigger Cant wait to get to the range!
-
Wilson Combat Trigger Conversion Unit
I installed the new low power unit along with a short reach trigger. The fit was snug ,but with some high quality lubricant and patience,it all worked out. The single and double action function of this unit should last for years to come.I highly recommend this part for reliability of the Beretta M9. It should be a factory part!
-
Helped More Than Expected!
I put this in my 92A1 and was able to tighten up my grouping by 20% on the first day at the range. As others have mentioned, I had to file the sides down a little to get it to move freely in the Wilson Combat Short Reach Steel Trigger, and the crimp on the retaining rod was really sharp so I took the points off while I was at it. The trigger pull is much smoother now!
-
Recommend
Easy, Drop-in installation. it worth.
-
This Is Good Stuff
This unit, with the short reach trigger, really contributed to a lighter/smoother trigger, I received it this morning and put it in this afternoon, adjustment and installation took less time than my five year old laptop did to boot up to write this review. As with everyone else, I had to stone the sides a touch to get it to fit nicely, I also touched up the hole for the trigger bar stud.
-
Not Exactly Drop-In, Even With Steel Trigger.
I purchased this unit, along with the reduced reach steel trigger, as an upgrade for my M9. The TCU body did NOT fit inside the trigger without applying pressure, and would not stay seated against the frame when cycling the trigger.
-
A Must Have! Highly Recommended!
The short-reach trigger, combined with this reduced power spring, and the 16lbs hammer spring proved to be an excellent combination. The creep I was experiencing in the DA trigger pull has been virtually eliminated. Its now much easier to properly stage the trigger and maintain a sight picture with the double action pull. As for the single action, the differences arent as pronounced, the trigger reset might be a little shorter, but the Berettas SA pull was never an issue that needed remedy. Also, I would like to note that new trigger unit has a nice crisp mechanical sound, it just sounds like quality, and it gives great audible feed back when staging the DA trigger.
-
File On The Sides A Bit Before Installing
My stock 92FS was no pleasure to shoot, even in single action. I installed a factory Beretta rear target sight and the following Wilson Combat items: steel trigger, lowest power hammer spring, lowest power trigger return spring. For around $130, its now a far better gun and my groups have shrunk in half with no more tendency down and to the left. Single action is really nice and crisp.