Clearance
BUSHING COMPENSATOR, MULTI-COMP, 1911 BARREL, FULL-SIZE, STAINLESS
Wilson Combat
$87.95
(32 reviews)
Write a Review
Wilson Combat
BUSHING COMPENSATOR, MULTI-COMP, 1911 BARREL, FULL-SIZE, STAINLESS
Maximize recoil suppression with the Multi-Port 1911 compensator. Featuring a built-in barrel bushing, three chambers, and seven exhaust ports see what an exceptional bushing compensator can add to your pistol.
Maximize recoil suppression with the Ingenious Multi-Port 1911 Compensator; featuring a built-in barrel bushing, three chambers and seven exhaust ports. Installing it on your 1911 Auto is as easy as changing out the barrel bushing – plus you can keep using your stock barrel for greater flexibility at minimal cost! With this remarkable compensator, you will experience an effortless upgrade to maximize performance while keeping costs low.
The Multi-Comp is designed to work on all Government length (5") 1911 Autos with .576 - .580 muzzle O.D. up to a caliber of .45 ACP, and it can be installed in seconds! All you need is the Wilson Combat #148-5 two-piece guide rod or stock recoil spring plug shortened to 1.2". Alternatively, any Commander length Plug will also do the trick for The Multi-Comp device.
- Built in barrel bushing for easy installation
- Three chambers and seven exhaust port for maximum recoil suppression
- Designed to be used with a stock barrel
- Compatible with all 5" 1911 handguns with a .576" - .580" muzzle O.D.
- Compatible with calibers up to .45 ACP
- Any commander length plug is also compatible with the bushing compensator
- CNC machined from stainless steel
- Bead blast finish with polished sides
- Minor fitting required
DISCLAIMER: Wilson Combat 1911 small parts may require minor fitting and should only be installed by a qualified gunsmith. Although these parts are intended to be drop-in, due to the range of tolerances between various manufacturers' handguns, some fitting may occasionally be necessary. We highly recommend all fitting/installation of small parts is done by a professional gunsmith.
Related Products
-
-
Clearance
-
Clearance
-
Clearance
Reviews
-
Looks good.
Minor fitting on my kimber Custom II. Matched the slide profile perfectly.
-
Installed on my Kimber Custom II
Installed on my Kimber Custon II with a minimum of fitting , even with my hottest hand loads of 230gr at close to 1k fps the recoil was very manageable and 10 yard groups went from 1.8 to 1.0 inches for 5 shot groups. I also think that my speed improved, though that hasn't been chronographed , just my impression. will be ordering one for my Grisan 10mm longslide when it get's in this week.
-
1911 Bushing Compensator
Advertises as a drop in. Maybe some model’s. But my Ruger SR 1911 I had to fit it to the slide. . Was a little bit oversized. But looks and works as advertised.
-
Sweet Compensator
I own a Ruger SR1911 and I wanted to make it my own,, I order this compensator with excellent turn around time from order to have in my hand was truly fast ,, I realized the compensator was to thick on the outside diameter I rigged my own jig with a long screw , washers , & bolt I added it to my hand drill & with a diamond tooth file I was able to take it down 0.02 thousands the compensator fits nice and snug & the new look of my SR1911 is awesome,,
-
Performs As Desired
A small amount of fettling with emery cloth and some extremely light work with a Swiss file provided an excellent fit on my SIG Nightmare.
-
Springfield Armory 1911 Loaded
Medium amount of fitting. Worked fine with stock pug, spring and guide rod. Upgraded to Wilson flat-wire spring and short rod. Love it.
-
Drop In Bushing / Compensator
Had one of these years ago in a Gold Cup Nat Match .45 and was very happy with the fit and results it gave, the last one I just bought went straight into a stainless Kimber TII in 38 super, fitted perfectly and works better than I could have hoped for, sure not as complete gas diversion as in conventional screw on comps but for something that took 5 min to fit mostly due to the full length guide rod fitting, the bushing comp on a stock guide rod is a true drop in comp that fits perfectly and works about 60 - 70% easy, taming the hot 160+ PF 38 super rounds to not much more than a heavy 22 rimfire target pistol.
-
Excellent, But...
Very nice looking, seems to fit the barrel very nice, maybe better than the factory one. Unfortunately it doesn't fit in the slide of my Kimber Stainless 2. I'll have to get it grinded a little.
-
Does Not Fit Kimber Target Ii 9Mm
Quality made and color is the same with my Kimber Target II 9mm Stainless. Only gave it 3 stars due to it does not fit my Kimber…would’ve been nice though…