Up to 35% off clearance. Discount applied in cart.
BUSHING COMPENSATOR, MULTI-COMP, 1911 BARREL, FULL-SIZE, STAINLESS

BUSHING COMPENSATOR, MULTI-COMP, 1911 BARREL, FULL-SIZE, STAINLESS

Wilson Combat
SKU:
397S
$87.95
(32 reviews)
Current Stock:
Adding to cart… The item has been added
Wilson Combat

Maximize recoil suppression with the Multi-Port 1911 compensator. Featuring a built-in barrel bushing, three chambers, and seven exhaust ports see what an exceptional bushing compensator can add to your pistol.

Maximize recoil suppression with the Ingenious Multi-Port 1911 Compensator; featuring a built-in barrel bushing, three chambers and seven exhaust ports. Installing it on your 1911 Auto is as easy as changing out the barrel bushing – plus you can keep using your stock barrel for greater flexibility at minimal cost! With this remarkable compensator, you will experience an effortless upgrade to maximize performance while keeping costs low.

The Multi-Comp is designed to work on all Government length (5") 1911 Autos with .576 - .580 muzzle O.D. up to a caliber of .45 ACP, and it can be installed in seconds! All you need is the Wilson Combat #148-5 two-piece guide rod or stock recoil spring plug shortened to 1.2". Alternatively, any Commander length Plug will also do the trick for The Multi-Comp device.

  • Built in barrel bushing for easy installation
  • Three chambers and seven exhaust port for maximum recoil suppression
  • Designed to be used with a stock barrel
  • Compatible with all 5" 1911 handguns with a .576" - .580" muzzle O.D.
  • Compatible with calibers up to .45 ACP
  • Any commander length plug is also compatible with the bushing compensator
  • CNC machined from stainless steel
  • Bead blast finish with polished sides
  • Minor fitting required

DISCLAIMER: Wilson Combat 1911 small parts may require minor fitting and should only be installed by a qualified gunsmith. Although these parts are intended to be drop-in, due to the range of tolerances between various manufacturers' handguns, some fitting may occasionally be necessary. We highly recommend all fitting/installation of small parts is done by a professional gunsmith.

Reviews

  • 5
    Looks Cool And Seems To Reduce Muzzle Rise

    Posted by Robert Collier on Jan 31st 2021

    I have an almost 20 year old stainless steel Wilson 1911 Classic. Compensator matches the gun perfectly and looks great on the the gun. Seems to help with muzzle rise at the range. Definitely will get your shooting buddies jealous. You definitely will need the two piece guide rod. I don’t think you could get it on the gun without it.

  • 1
    Very Disappointing!

    Posted by Michael Parnell on May 29th 2020

    The outside required a bit of work to fit it to the slide. The inside was a bit loose on the barrel. It looks good on the weapon. Unfortunately, it does not reduce recoil any noticeable amount. Just not worth the money, time and effort to install.

  • 5
    Great Fit!!!

    Posted by M.. Gonzales on Sep 24th 2018

    I purchased this compensator for my 10mm Kimber stainless Target 2. I have recently upgraded guide rod and spring to Wilson Combat flat wire and short rod after installing then purchase compensator fit like a glove no Gunsmithing required great product.

  • 3
    Looks Good, But Couldnt Use

    Posted by Anonymous on Feb 13th 2017

    I really enjoy the look of the compensator and Im sure it would make a great change in the way my SR1911 shoots, but it will not fit the barrel sadly.

  • 3
    Colt Government

    Posted by L Pierce on Dec 7th 2016

    Works as expected. Minor fitting. Doesnt match the slide profile though. Could not be installed with oem recoil plug.

  • 5
    Dan Wesson Valor

    Posted by Bill Snyder on Feb 10th 2016

    I plan on using this particular firearm for fun as well as competitive shooting. I bought the compensator to hopefully reduce muzzle flip. I must mention that the Valor was already a very controllable and accurate firearm. Being a shade tree gunsmith I must admit I was a bit nervous taking on this job of fitting the bushing. I carefully fitted the bushing to the frame. Upon completion , I checked for barrel spring, the Valor is a full size Government model 5 inch barrel.I did have barrel spring and proceeded to I relieve the bushing in 3 different areas to get a stress free fit. I took it to the range and was ecstatic with the results. The patterns were nice and tight with next to no recoil or muzzle flip.I referenced a shop manual by Jerry Kuhnhausen to assist in the gunsmithing.

  • 5
    Commander Install

    Posted by Aaron Paoli on Jun 14th 2015

    After talking to a technician at Wilson Combat, he advised that it could fit a Commander 4.25 with modification. I purchased and took to my FFL Gunsmith and had it fitted. He didnt have to do much and it fits great. I noticed an improvement in muzzle climb less and quicker re-acquisition.

  • 5
    Taurus Pt1911Ar

    Posted by Taylor on Apr 22nd 2014

    Slotted in with very minimal fitting, fit with a new recoil spring and WC 2 piece guide rod, and shooting it today was great. Improved accuracy and much better recoil control. Great buy and great price.

  • 5
    Amazing

    Posted by Tom Garcia on Apr 21st 2014

    On my 80s series officer, it looks nice, fits snug and shoots like a dream. Just be aware that you must fit the spring cap, which means cutting it about .3 inches, scary, but very doable.