Clearance
Experience superior cycling and operation with a combination of our long-lasting flat-wire spring coupled with an exact machined full length guide rod.
Upgrade your full size bushing barrel 1911 with no modifications needed by switching to the flat wire full length guide rod and plug. Disassembly and assembly are just as easy, if not easier than stock components so all that's necessary is a simple wrench! Plus, it features an innovative hole which allows for a pin-style takedown in mere moments - simply use a small nail or bent paperclip! Constructed of hardened stainless steel, this rod will withstand intense shooting sessions.
- Size: 5" Full size
- Full length
- Full length recoil spring guide machined from bar stock
- .250" rod diameter
- Length: 1.090"
- Width: .496"
- Internal diameter: .450
- Compatible with shok-buff recoil buffers
- We recommend using our #22 or #22P barrel bushing wrench with this product
NOTE: This flat wire guide rod is only compatible with a flat wire recoil spring. If any other type of spring is used, the user will not experience the desired results and may even damage their gun. For our selection of suggested flat wire recoil springs, click here
NOTE: Always wear high-quality safety glasses when installing or fitting any spring to prevent eye injury. High-quality safety eyeglasses should be used when shooting any firearm.
For installation test procedures and suggestions, click here.
Related Products
-
-
Clearance
-
Clearance
-
Clearance
Reviews
-
Awesome
I have this guide rod coupled with Wilson flat wire springs in 5 of my 1911s ranging from 9mm, 10mm, and 45. Couldn’t be happier with these things. Do they reduce recoil? Not that I’ve noticed. But their massively extended service life makes all the difference. Standard springs need to be replaced every 1,000 to 4,000 rounds, but these flat wire springs are good for 15,000+ rounds. Most people won’t put 15,000 rounds through their pistol in their lifetime. What more needs be said?
-
Bent After 300 Rounds
I used this kit for my Sig full size .45 .I used the 17 lb spring as recommended. I shot about 300 rounds at a tactical pistol course, using 230 Gr FMJ. I didn't notice much change in recoil from my original half length guide rod. Near the end of the course the Sig was having issues getting back into full battery. I thought maybe it was getting gummed up or needed more lube. When I broke it down I noticed the full length had bent. Not worth the money. Replaced original rod and spring, and everything is fine. Waste of money.
-
Sig Emperor Scorpion 1911
The fit was perfect, so perfect that I thought it was made for it. Was able to use the stock flat wire spring from Sig Sauer. Real tight tolerance, and easy installation.
-
Great Quality
Ordered this item along with a flat-wire spring for my 9mm 5" 1911. Fit and finish is top notch like everything else Wilson Combat.
-
Flatwire Full Length Guide Rod Perfection
Ive used a few different types of flatwire guide rods and this one is the best. My favorite feature is the raised portion or step if you will at the base of the guide rod. This allows for the shok buff to snap into place so it doesnt move around during firing, providing further reliabily in the recoil spring assembly. These are the best! Furthermore, cycling is very smooth and consistent with the full length guide rod.
-
Springfield Armory 1911 A1 Loaded
I got this kit for my 1911 mostly to get rid of the 2 piece guide rod that needed a hex key to remove. When I researched these I saw nothing but amazing reviews on the flat wire kit, So I had to try it! I installed it on my 1911 this morning and I must say this is one awesome kit! Dropped in with no problems, perfect fit and the action in the slide feels so smooth!!! I am amazed at the difference, just pulling the slide back I could tell it was much MUCH better! Also super easy to take the pistol apart now. Very happy with this! I also got the #17 flatwire spring to go with it. All the parts are super smooth, just as you would expect from top tier parts from Wilson Combat. Next up sights and maybe a one piece bullet proof magwell :
-
Smooth
Installed this on my SA MC operator to replace the GI style setup. Much smoother recoil vs stock. A note, I did have to shorten the plug length on the internal side as springfield had a stop built into the front of the slide. Used a basic pipe cutter and dropped right in. Great kit, thanks Wilson!
-
Amazing
I bought this along with the flat-wire spring as an upgrade for my Ruger SR1911. Immediately noticed how much smoother it is compared to the GI style guide rod. I have the Bulletproof magwell installed as well, and it brought more weight to the front end, which balanced it out. Great piece of kit if youre looking to upgrade your 1911
-
Remington R1 Enhanced
This guide rod and the flat wire spring are a match made in haven. Had to file the barrel bushing do to the Wilson Multi-Comp Bushing Compensator. Noticed the smoothness of the slight and recoil immediately